What can the RV roof vent covers offer to you? They are designed enabling the fresh air to ventilate properly while the light also gets into your RV. The ventilation is allowed by the featured built-in screen and aerodynamic design. Easily install the covers after being mounted to existing roof vents. There will as well be outer dimensions including the width and the height. They are also constructed of UV-stabilized and rugged resin. They often feature removable louvers that promise easy cleaning.
Since the RV can get stuffy as always when closed up, a continuous flow of fresh air will keep it smelling and feeling fresh. The featured design of the cover will allow it to stay just open when raining or when traveling.
Easily install them with the use of mounting hardware. Mount one on your specific roof vent. It is up to you too to choose a color for your liking. As mentioned, they come with removable louver allowing ease of access to the roof vent. This is also for cleaning and maintenance.
Installation
When you will install the RV roof vent covers, you will often require the use of a pencil. Drill with three-sixteenth inch a bit. Make use of a crescent wrench and a head screwdriver. Other materials may as well be needed already included in the item.
Install it by placing it at over the centermost part of the roof vent. This is, of course, while the louvers face the rear part of the RV. Mark the location of the slot using your pencil. Lay the bracket right through the roof so that the slot will intersect on the marked locations next to the vent frame corners.
Mark the screw hole’s locations of the vent bracket through the vent frame. Do a drill through the frame just exactly about a three-sixteenth inch diameter. Put the carriage bolt up and the bracket slot. Fasten its bracket feature through the frame and roof vent with the use of lock washer, washer, screw, and nut.
As per the nuts and washers, they can be found inside the vent frame. Also, install 3 of the brackets in the same manner. When the 4 brackets have already been installed, you could now put the RV roof vent cover over the 4 carriage bolts. Attach with the lock washers, one-fourth-inch washers, and nuts.
Make sure that the square heads of carriage bolts are exactly seated in the bracket slots. This must be done before tightening it. This will avoid them from possibly turning. Never get into the idea of over-tightening it. You will notice a gap right between the RV roof and the vent. This is also somehow considered to be normal. This helps avoid condensation. The RV roof vent cover you bought can now easily be installed and used.
Choose only the best from the selections of RV roof vent covers available on the market today. This will enable you to settle with the right choice that complements your money!
+ There are no comments
Add yours